Metrics and Benchmarks

Average Speed of Answer: Setting a Target

How a medical practice can choose a speed-of-answer target, measure it by interval, and staff the phones to meet it, with a worked staffing Example.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Two measures that describe the wait
  2. Choosing a target that fits your practice
  3. Measure it by interval
  4. Staff to the target with simple arithmetic
  5. Reduce workload before adding people
  6. What to tell callers in the queue
  7. Review the target each quarter
  8. Frequently asked questions
  9. References
Metrics and Benchmarks: Average Speed of Answer: Setting a TargetArticle coverMETRICS AND BENCHMARKSAverage Speed ofAnswer: Setting aTargetAva Medical IntakeInsightsMetrics and Benchmarks: Average Speed of Answer: Setting a TargetArticle coverMETRICS AND BENCHMARKSAverage Speed ofAnswer: Setting aTargetAva Medical Intake

Key takeaways

  • Average speed of answer is the mean wait of answered calls; a service level is the share answered within a set number of seconds. Use both.
  • Pick the target from what callers are calling about and what the team can staff, then write it as a service level for each 30-minute interval.
  • Staffing follows simple arithmetic: calls in the interval times average handle time, divided by the time one person can spend on the phone.
  • Averages hide long waits. Watch the longest waits and the abandoned calls alongside the average.

Two measures that describe the wait

Average speed of answer, often shortened to ASA, is the total time answered callers spent waiting divided by the number of answered calls. It is easy to understand and every phone system reports it. Its weakness is that it only counts callers who stayed. If the queue gets long and impatient callers hang up, the ones left behind may still produce a respectable average.

A service level fills that gap. It is written as a share of calls answered within a set time, for example most calls answered within 30 seconds. Service level shows how many callers had a short wait; ASA shows the typical wait for everyone answered. Reported together, with the abandonment rate, they give an honest picture of the queue.

Speed matters to patients. Among US adults who use AI for health information, 65% said a major reason was wanting quick and immediate advice[1]. A caller who waits several minutes to ask a simple question is likely to look for that speed somewhere else.

Choosing a target that fits your practice

There is no single correct target. The right one depends on what callers need and what the practice can staff. Use these criteria to choose.

  • Call mix. A pediatric or urgent care line with many same-day sick calls needs a tighter target than a specialty practice where most calls are scheduling follow-ups.
  • Alternatives for callers. If the practice offers a callback option or a working patient portal, a slightly longer wait does less harm than if the phone is the only route.
  • Who answers. Dedicated phone staff can hold a tighter target than front desk staff who also check patients in.
  • Peak shape. A practice with a sharp morning peak may set a looser target for that hour and a tighter one for the rest of the day, rather than a target it misses every morning.
  • Cost of staffing. Every step tighter in the target requires more staffed time at the peak. Know what that means before committing.

Write the target as a service level per 30-minute interval during open hours, and add a ceiling on the longest acceptable wait. A practice-wide daily ASA target is easy to meet on paper and tells you little about the 8 a.m. caller.

Measure it by interval

  1. Pull the interval report

    Ask your phone vendor for calls offered, answered, abandoned, ASA and longest wait by 30-minute interval. Export at least four normal weeks.

  2. Find average handle time

    The same report, or a separate agent report, shows average talk time plus after-call work. If after-call work is not recorded, time a sample of calls for a week, including the minute spent finishing notes.

  3. Average the weeks by weekday and interval

    Mondays usually look different from Thursdays. Build a grid of weekday by interval, showing calls offered and the service level achieved.

  4. Mark the misses

    Highlight every interval where the service level fell below target or the longest wait exceeded your ceiling. These are where staffing and process changes should go first.

  5. Check the reasons

    Tag calls by type during the missed intervals for one week. The mix shows whether the queue needs people or a better process for one call type.

Staff to the target with simple arithmetic

Phone workload in any interval is the number of calls multiplied by the average handle time. Divide that workload by the minutes one person can realistically spend on the phone in that interval, after check-ins, messages and breaks, and you have the number of people needed just to keep up. To answer most calls quickly, rather than eventually, you need some extra capacity above that minimum, because calls do not arrive evenly.

Example staffing arithmetic for a fictional practice; numbers are illustrative
IntervalCalls offeredAverage handle timeWorkload (minutes)Phone minutes per personPeople needed to keep upPlanned on phones
8:00–8:30364 min144255.86–7
8:30–9:00284 min112254.55–6
12:30–1:00184 min72203.64–5
3:00–3:30124 min48202.43

Example: in the table, the fictional practice receives 36 calls between 8:00 and 8:30, each taking about four minutes including notes. That is 144 minutes of work in a 30-minute window. If a person can spend about 25 of those 30 minutes on the phone, the practice needs nearly six people just to keep pace, and six or seven to answer most calls quickly. If only three people are on the phones at 8 a.m., the queue grows by design, whatever the target says.

Example, continued: the practice has three choices. It can add people at the peak, shift some calls out of the peak, or shorten the handle time. Usually the answer is a mix: one earlier start, a callback list for non-urgent requests, and a shorter script for the most common call type.

Reduce workload before adding people

Phone staff are hard to add quickly. The US is projected to have about 105,100 openings for receptionists each year over 2025 to 2035, mostly to replace workers who leave[2], and the median receptionist earned $18.27 an hour in 2025[2]. Before hiring, look for minutes to remove.

  • Shorten the top call type. Practice leaders rank eligibility and prior authorization (45%) and scheduling (31%) as the most time-consuming phone tasks[3]. For scheduling, a scripted offer of two times, rather than an open question, saves time on every call.
  • Move non-urgent call types to a callback window. Records requests, billing questions and prior authorization status can often wait until mid-morning.
  • Answer common questions before the queue. Hours, location, parking and accepted insurance can go in the greeting, on the website and in appointment reminders.
  • Fix the causes of repeat calls. A patient who calls twice about the same issue doubles the workload for one need.
  • Check the phone menu. Every misrouted call adds handle time when it is transferred.
Where practices applying AI and automation to access start, 2026Share of US practice leaders, MGMA Stat poll, 177 responses
Where practices applying AI and automation to access start, 2026Bar chart. Scheduling: 31%; Calls: 27%; Registration and eligibility: 23%; Prior authorization: 16%.SchedulingScheduling: 31%31%CallsCalls: 27%27%Registration and eligibilityRegistration and eligibility: 23%23%Prior authorizationPrior authorization: 16%16%Where practices applying AI and automation to access start, 2026Bar chart. Scheduling: 31%; Calls: 27%; Registration and eligibility: 23%; Prior authorization: 16%.SchedulingScheduling: 31%31%CallsCalls: 27%27%Registration and eligibilityRegistration and eligibility: 23%23%Prior authorizationPrior authorization: 16%16%

Source: Medical Group Management Association (MGMA), 2026[4]

Show the data
ItemValue
Scheduling31%
Calls27%
Registration and eligibility23%
Prior authorization16%

Many practices are looking at automation for exactly these tasks. In a 2026 MGMA poll, practices turning to AI and automation to improve access put scheduling first (31%), then calls (27%), registration and eligibility (23%) and prior authorization (16%)[4].

What to tell callers in the queue

Queue message: β€œThanks for calling. If this is a medical emergency, hang up and dial 911. We are helping other patients and will be with you shortly. If you would prefer a call back, press 1 and we will call you within the next hour.” Only offer a callback window you can keep.

Avoid announcing estimated wait times unless the system calculates them accurately. A wrong estimate creates more frustration than none. Avoid long recorded messages about the portal at the start of the call; they lengthen every call, including the urgent ones.

Review the target each quarter

Plan for turnover in the target as well. In 2026, 29% of medical group leaders reported higher staff turnover than in 2025, and front-desk and entry-level administrative roles remain among the most common churn points[5]. New staff take longer on each call while they learn the scripts and systems, so handle time rises after every departure. When someone new starts, recalculate the interval arithmetic with a longer handle time for their first weeks, pair them with an experienced colleague at the peak, and keep the more complex call types, such as billing disputes, with experienced staff until the new person is ready.

Once the target is in place, review it each quarter with the interval grid. If the practice meets it everywhere, consider tightening it at the peak. If it is missed every day at the same time, either change staffing for that interval or reset the target honestly for that hour. The phone is still the front door for a large share of patients[3], so the target deserves the same attention as any clinical schedule.

See also call abandonment rate, first call resolution and new-patient call conversion.

Frequently asked questions

What is average speed of answer?

The total time answered callers waited divided by the number of answered calls. It excludes callers who hung up, so report it with the abandonment rate.

What is a good speed-of-answer target for a medical office?

It depends on call mix and staffing. Write it as a share of calls answered within a set number of seconds for each 30-minute interval, add a ceiling on the longest wait, and set it from your own baseline.

How many people do we need on the phones?

Multiply calls in each interval by average handle time, divide by the phone minutes one person has in that interval, and add some spare capacity because calls arrive unevenly.

Should we tell callers how long they will wait?

Only if the phone system estimates it accurately. Offering a callback within a time you can keep is usually more helpful.

References

  1. KFF (2026). KFF Tracking Poll on Health Information and Trust: Use of AI For Health Information and Advice (fielded Feb 24 - Mar 2, 2026) (opens in a new tab) ↑

  2. U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Receptionists (opens in a new tab) ↑

  3. Medical Group Management Association (MGMA) (2026). Phones are still a bottleneck costing medical practices time they can't afford (opens in a new tab) ↑

  4. Medical Group Management Association (MGMA) (2026). Automatic for the people: AI moves for medical practices to boost the front office and access (opens in a new tab) ↑

  5. Medical Group Management Association (MGMA) (2026). Stabilized but not solved: Staff turnover in medical practices looking no better, no worse in 2026 (opens in a new tab) ↑

Book a demo

See Ava handle your calls.

Book a short demo. We’ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo