Key takeaways
- Book the seat appointment from the lab's due date plus a buffer, never from a guess at the prep visit.
- Keep one case log that every team member can see, with a named owner for each case.
- Check that every case has arrived, and is the right case, at least two working days before the seat.
- When a case is late, call the patient early with a specific new time, and track late cases by lab.
The cost of a seat with no case
Few things waste a dental schedule like a crown seat appointment with no crown. The patient took time off work, the chair sat booked, the assistant set up, and now the visit is a temporary recement and an apology. It happens when the seat date is chosen at the prep visit without reference to the lab's actual turnaround, and when nobody checks the case before the day.
Chair time is valuable. Average gross billings per general dentist in private practice were $965,660 in 2025[1], so every lost hour costs real revenue, and the seat appointment is often the visit where the largest part of the fee is completed. Patients who are sent home are also more likely to miss or move later appointments.
- Higher 32%
- About the same 58%
- Lower 10%
Source: Medical Group Management Association (MGMA), 2026[2]
Show the data
| Item | Value |
|---|---|
| Higher | 32% |
| About the same | 58% |
| Lower | 10% |
Missed visits are a wider problem. In August 2026, 32% of US medical groups reported higher patient no-show rates year to date than in 2025, and only 10% reported lower[2]. Dental offices face the same pressures, and a seat appointment that fails because of the office makes the next one easier for the patient to skip.
The case log
Use one case log for every lab case, whether in your practice management system, the lab's portal or a shared spreadsheet. A paper list on one person's desk fails the day they are off. Each case needs these fields:
| Field | Why it matters |
|---|---|
| Patient and case type | Crown, bridge, denture, night guard, implant restoration |
| Lab and send date | Who has it and since when |
| Method | Digital scan or physical impression, which affects transit time |
| Lab's promised due date | The date the case should be back in the office |
| Seat appointment date | Must be after the due date plus your buffer |
| Owner | The team member responsible for chasing this case |
| Status | Sent, in progress, shipped, received, checked, seated |
| Notes | Shade, special instructions, try-in stages for dentures |
Review the log at the morning huddle for any case due in the next five working days. That one minute catches most problems while there is still time to fix them.
Booking the seat date: the buffer rule
Know each lab's turnaround
Keep a short table of each lab's working-day turnaround for your common case types, from their published schedule and your own records.
Count working days, not calendar days
Skip weekends and both the lab's and your office's holidays. Ask labs for their holiday closures at the start of each year.
Add transit time
Physical impressions and finished cases travel by courier or post. Add the days each way that your records show.
Add a buffer
Add a set number of working days as a house rule. The buffer absorbs small delays and the check-in step.
Book the seat
Offer the patient two seat times on or after that date, before they leave the prep visit.
Record both dates
Enter the lab due date and the seat date in the case log, so anyone can see the margin.
Example: a fictional office sends a digital crown scan on a Monday to a lab with a seven-working-day turnaround and two days of shipping back. The case is due the following Thursday week. With a two-day buffer, the earliest seat date is the Monday after, and the desk offers the patient Monday at 9 or Tuesday at 2.
The 48-hour arrival check
Two working days before every seat appointment, the case owner confirms the case is in the building and correct. Build it into a daily task list so it never depends on memory.
- Is the case physically in the office, or shown as shipped with tracking?
- Is it the right patient, the right tooth or arch, and the right material?
- Does the shade or design match the prescription?
- Is anything missing, such as models, a custom abutment or screws for an implant crown?
- Does the case need a try-in or adjustment step the schedule did not allow for?
If the case is not in the office 48 hours before the seat: call the lab first for a firm ship date, then call the patient the same day. Do not wait until the morning of the visit.
Calling a patient when the case is late
Patients forgive a delay much more easily when they hear about it early and are offered a specific new time. Keep the call short and own the problem.
Script: 'Hi [name], this is [team member] from [practice]. I'm calling about your crown appointment on [day]. The lab has told us your crown will be a little late, and we don't want you to come in for nothing. Could we move you to [day and time] or [day and time]? I'm sorry for the change.'
Offer the patient a slot that suits them, even if it means moving another booking. If the temporary crown is loose or uncomfortable, ask the clinician whether the patient needs a short visit to check it in the meantime. Record the delay against the lab in the case log.
Remakes, adjustments and multi-stage cases
Not every case seats on the first try. Plan for the cases that commonly need more steps.
- Dentures and partials: book every try-in stage at the start, each from the lab's turnaround for that stage.
- Implant restorations: confirm all parts are ordered and received, not only the crown.
- Large bridges and smile cases: ask the dentist whether a try-in visit is needed before the final seat.
- Remakes: log them with the reason, such as fit, shade or a lab error, and book the new seat from the remake due date plus the buffer.
Many offices take part of the fee when the case is sent to the lab, because lab costs are committed before the seat. If you do, put it in your financial policy so it is applied the same way for everyone.
Busy seasons and holidays
Lab turnaround stretches at predictable times: the weeks before major holidays, the end of the year when patients rush to use remaining benefits, and summer when lab staff take leave. Plan for these rather than discovering them case by case.
- Ask each lab in January for its closure dates and any busy-season turnaround changes, and add them to your turnaround table.
- In the last two months of the year, add extra buffer days to every seat booked, because benefit-driven demand fills both your schedule and the lab's.
- Send cases early in the week where you can, so a weekend does not sit in the middle of the transit time.
- Check the log twice a week, not once, during these periods.
- Tell patients at the prep visit if their seat date falls near a holiday, so a small delay does not surprise them.
A short note in the case log, such as 'holiday period: extra buffer applied', helps the next person understand why a seat date was set further out.
Who owns lab tracking
In most offices, dental assistants or a scheduling coordinator track cases. Make it a named duty with time in the day, not a task fitted in between other work. Dental assistants earned a median of $48,070 a year in 2025[3], and with staffing shortages named as the top challenge by about 62% of dentists for 2025[4], many offices are short of hands. A clear owner and a written routine stop cases falling through when someone is away.
Cross-train a second person to run the 48-hour check. If you split front office roles, decide whether lab tracking sits with scheduling or clinical staff; our comparison of a scheduling coordinator and a financial coordinator covers the trade-offs.
Track lab performance
Review these monthly, by lab:
- Share of cases received by the promised due date.
- Share of seat appointments moved because the case was late or wrong.
- Remakes by reason.
- Average working days from send to receipt for each case type.
Share the numbers with each lab. Most labs want to know about problems, and a factual report is the best basis for a conversation about turnaround or quality. If one lab is consistently late, adjust your turnaround table for that lab rather than letting patients absorb the delay.
Patients appreciate a short confirmation message once the case arrives, especially if the seat date was set weeks ago. About 91% of US adults own a smartphone[5], so a text confirming 'your crown has arrived and we look forward to seeing you on [day]' is easy to send and reduces late cancellations.
Frequently asked questions
How long a buffer should we add before a seat appointment?
Set a house rule in working days based on your labs' actual record. Offices with reliable labs and digital workflows can use a shorter buffer than those relying on courier delivery.
Who should check that lab cases have arrived?
A named case owner, usually a dental assistant or scheduling coordinator, with a second person trained to cover. The check should be a daily task two working days before each seat.
What should we do if a case arrives wrong?
Tell the dentist, call the lab for a remake date, and call the patient the same day with two new seat times. Log the remake and the reason.
Should we tell patients when the case arrives?
A short confirmation text or call is helpful, especially when the seat was booked weeks earlier. Keep clinical details out of texts.
References
American Dental Association Health Policy Institute (2025). Dental Practice Research (FAQs) (opens in a new tab) โ
Medical Group Management Association (MGMA) (2026). About 1 in 3 medical groups see higher no-shows in 2026 as patients face higher costs (opens in a new tab) โ
U.S. Bureau of Labor Statistics (2025). Occupational Outlook Handbook: Dental Assistants (opens in a new tab) โ
ADA News (American Dental Association) (2024). Five years later: Staffing shortages, infection control since the COVID-19 pandemic (opens in a new tab) โ
Pew Research Center (2026). Americans' Use of Mobile Devices in 2026 (Mobile Fact Sheet) (opens in a new tab) โ