Key takeaways
- Capacity planning is arithmetic: annual demand by visit type, converted to provider hours, compared with the hours you actually have.
- Count supply after leave, admin time and meetings, not from the template on paper.
- Demand is seasonal; flu activity most often peaks in February[1] and January brings a wave of new and changed coverage[2].
- Track unmet demand directly, because a full schedule hides the patients you turned away.
Long waits are usually a mismatch, not a mystery
When the next routine appointment is weeks away, the cause is almost always that demand for some visit types exceeds the provider time set aside for them. In MGMA's July 2026 poll, 28% of medical groups said new-patient wait times were longer than a year earlier, and 48% had added advanced practice providers relative to physicians over the past year to maintain access[3]. Hiring is one answer. Matching the time you already have to the demand you actually face is cheaper and comes first.
Capacity planning answers three questions: how many visits of each type will patients need over the next year, how many provider hours does that take, and how many hours do you really have. The rest is deciding how to close the gap.
Estimate demand by visit type
Define your active panel
Count unique patients seen in the last 18 to 24 months, by provider. Use the same definition every time you repeat the exercise.
Pull last year's visits by type
Annual wellness or physicals, chronic care follow-ups, acute visits, new patients and procedures. Use visit types from the schedule, not billing codes, so the numbers match your templates.
Add the visits you could not book
Patients sent to urgent care, told to call back or put on a waitlist. A simple tally at the desk for a month gives a usable estimate.
Adjust for known changes
New providers, departures, a payer contract added or dropped, a new referral relationship.
Convert to hours
Multiply each visit type's expected count by its slot length, then divide by 60.
Sense-check the result against national patterns. US physician offices recorded 320.7 visits per 100 people in 2019[4], and new patients accounted for 16.8% of office visits[5]. Your mix will differ by specialty and population, but a primary care estimate far outside these figures is worth a second look.
Worked Example: one primary care provider
Example. A fictional family physician has an active panel of 2,000 patients. Last year's visits, plus a month of tallied unmet requests scaled to a year, produce the demand below.
| Visit type | Visits per year (Example) | Slot length | Hours needed |
|---|---|---|---|
| Annual physical or wellness | 1,200 | 30 minutes | 600 |
| Chronic care follow-up | 2,400 | 20 minutes | 800 |
| Acute and same-day | 1,800 | 15 minutes | 450 |
| New patient | 300 | 40 minutes | 200 |
| Total | 5,700 | Mixed | 2,050 |
Now supply. On paper, the physician works 36 patient-facing hours a week, 48 weeks a year, or 1,728 hours. In this Example, demand needs 2,050 hours, a gap of 322 hours, about 19% of supply. That is why the third-next-available appointment for a physical is seven weeks out.
Measure supply honestly
Templates overstate supply. Count the hours that actually produced visits over the last year, and compare them with the template. The difference usually comes from a few predictable places.
- Vacation, conference and sick leave, including the weeks around holidays when templates are thinned.
- Administrative time blocked on the template, such as inbox time or meetings, that is never released.
- Slots that go unfilled because of no-shows and late cancellations.
- Sessions lost to hospital or nursing home rounds, procedure overruns or teaching.
- Slots held for same-day demand that expire unused on quiet days.
Some of these are deliberate and should stay. Inbox time, for example, is real work that otherwise happens at night. The point is to plan with the real number so the plan works.
Plan for the seasons
Demand is not flat. US flu season usually runs through fall and winter, and across 40 seasons from 1982-83 to 2023-24 flu activity most often peaked in February (17 seasons), followed by December (7), January (6) and March (6)[1]. Acute demand in a primary care or pediatric office follows the same curve.
Source: Centers for Disease Control and Prevention, 1982-2024[1]
Show the data
| Item | Value |
|---|---|
| December | 7 seasons |
| January | 6 seasons |
| February | 17 seasons |
| March | 6 seasons |
| Other months | 4 seasons |
January adds a coverage wave. ACA Marketplace open enrollment runs from November 1 to January 15, and enrolling by December 15 starts coverage on January 1[2], so January brings newly insured patients and many who changed plans. Expect more new-patient calls, more insurance questions at check-in and more eligibility problems. Back-to-school forms and sports physicals do the same in late summer for pediatric and family practices.
- Shift the template mix by season: more acute and same-day slots from December to March, more physicals in summer.
- Schedule clinician vacations against your demand curve, not just against each other.
- Run eligibility checks earlier in January, and add registration help at the desk for the first two weeks.
Close the gap: options in order
- Fix the mix. Move hours from visit types with short waits to those with long waits. This costs nothing and is often enough.
- Recover lost supply. Reduce no-shows, release unused held slots earlier and keep blocked admin time to what is needed.
- Right-size slot lengths. Use real visit times so slots are neither padded nor so short that the day runs late.
- Change who sees what. Route visit types that suit advanced practice providers, nurses or pharmacists to them, within your clinical rules.
- Add hours. Extended or weekend sessions, preferably where unmet demand is highest.
- Add people. Only after the steps above, and sized to the remaining gap.
In the Example above, moving 100 hours of acute slots into physicals over the summer, recovering 120 hours lost to no-shows, and sending 300 straightforward chronic follow-ups to a nurse practitioner closes most of the gap without a new physician.
Mistakes that sink capacity plans
- Planning from template hours instead of hours that produced visits. The plan looks balanced and the waits stay long.
- Ignoring unmet demand. If you count only booked visits, the plan confirms the shortage you already have.
- Using one slot length for every visit type. Physicals, new patients and procedures need their own figures.
- Treating the panel as fixed. Patients join and leave; a panel that grew by a tenth in a year needs a tenth more time.
- Fixing averages and missing peaks. A plan that balances over twelve months can still fail every February.
- Doing it once. Demand, payer contracts and staff all change; rerun the numbers each quarter.
Assign the work to one person, usually the practice administrator or operations manager, with a physician lead who can agree changes to templates. The first pass takes a few days of data work. After that, a quarterly refresh takes an afternoon if the reports are saved.
Share the result with the whole team in plain terms: how many hours of demand, how many hours of supply, where the gap is and what will change. Front desk staff, who hear the requests that cannot be met, are often the first to spot when the plan is drifting.
Track unmet demand every week
A full schedule tells you nothing about the patients you turned away. Track them directly: a desk tally of requests that ended without a booking, waitlist size by visit type, and third-next-available appointment by visit type and provider. If an SI Employee such as Ava covers your overflow and after-hours calls, its call summaries are another source for counting requests the desk never saw.
- Third-next-available appointment, by visit type, every Monday.
- Requests that ended without a booking, by reason.
- Hours of demand versus hours of supply, recalculated each quarter.
- Share of template hours that produced visits.
Put the capacity rules into your appointment scheduling policy so template changes follow the plan. Specialty and procedure-heavy offices should also review block scheduling, where reserved time is a common source of hidden capacity.
Frequently asked questions
How do you calculate appointment demand?
Count last year's visits by visit type, add an estimate of requests you could not book, adjust for known changes, then multiply by slot length to get provider hours needed.
What is third-next-available appointment?
The third open slot for a given visit type and provider. It ignores one-off cancellations, so it shows real access better than the next available slot.
How should we plan for flu season?
Shift template mix toward acute and same-day visits from December through March, when flu activity most often peaks[1], and avoid clustering clinician leave in those months.
When should we hire another provider?
After fixing visit mix, recovering lost supply and routing suitable visits to other clinicians. Size the hire to the gap that remains.
References
Centers for Disease Control and Prevention (1982-2024). Flu Season (opens in a new tab) โ
HealthCare.gov (Centers for Medicare & Medicaid Services) (2026-2027). Dates and deadlines for 2027 health insurance (opens in a new tab) โ
Medical Group Management Association (MGMA) (2026). New-patient wait times largely hold flat in 2026 as some groups add providers in bid to meet demand (opens in a new tab) โ
CDC National Center for Health Statistics (2019). FastStats - Physician office visits (opens in a new tab) โ
CDC National Center for Health Statistics (2019). National Ambulatory Medical Care Survey: 2019 National Summary Tables (opens in a new tab) โ