Front Desk Staffing

Measuring Front Desk Workload Before You Hire

Run a one-week front desk time study, convert task minutes into staffing hours and decide whether to hire, shift work elsewhere or remove it.

AssistCall research teamPublished Reviewed by Faruque Amin, VP of Sales and Marketing7 min read

On this page
  1. Why measure before you hire
  2. What to measure
  3. Run a one-week time study
  4. Do not forget the portal
  5. Turn minutes into staffing hours
  6. Decide: hire, shift or remove
  7. Pitfalls to avoid
  8. Using the results
  9. Frequently asked questions
  10. References
Front Desk Staffing: Measuring Front Desk Workload Before You HireArticle coverFRONT DESK STAFFINGMeasuring Front DeskWorkload Before YouHireAva Medical IntakeInsightsFront Desk Staffing: Measuring Front Desk Workload Before You HireArticle coverFRONT DESK STAFFINGMeasuring Front DeskWorkload Before YouHireAva Medical Intake

Key takeaways

  • Time every front desk task for one normal week before deciding to hire; the result is often a mix of hiring, shifting and removing work.
  • Count volume from systems you already have, such as phone reports, the scheduling log and the portal inbox, then time a sample of each task.
  • Portal work is growing: 70% of medical groups reported higher patient portal message volume in 2024[1], and it often lands on the front desk unmeasured.
  • Convert minutes to hours, add a realistic allowance for interruptions and breaks, and compare with the hours you actually staff.

Why measure before you hire

When the front desk says it is overwhelmed, it usually is. But the answer is not always another person. Sometimes the work has grown in one area, such as portal messages or prior authorizations, while other tasks could be automated or moved to another team. Sometimes the staffing pattern is wrong rather than the headcount: enough hours in the day, but too few people at 8 a.m. and too many at 3 p.m. A short, structured workload assessment tells you which problem you have.

It also gives you a case the physicians or owners can follow. Saying the desk is drowning starts a debate. Showing that phone and portal work adds up to more hours than are staffed between 8 and 11 a.m. ends one.

Measure tasks rather than job titles. Front office work in physician practices is spread across several roles: offices of physicians employed 135,030 receptionists and information clerks and 297,820 medical secretaries and administrative assistants in May 2025[2][3], and in many practices medical assistants also answer phones and handle portal requests. If you only study the people called receptionists, you will miss part of the work and misjudge where the extra hours should go.

What to measure

Group the work into a manageable list of task codes, typically ten to fifteen. Too few and the result hides where time goes; too many and staff stop logging accurately. A typical set looks like this:

  • Inbound calls: scheduling, rescheduling and cancellations.
  • Inbound calls: insurance, billing and general questions.
  • Outbound calls: confirmations, recalls, callbacks.
  • Check-in, including identity check, demographics, insurance card scan and copay.
  • Check-out, including follow-up booking, referrals and balances.
  • New-patient registration and forms.
  • Insurance eligibility checks and prior authorizations.
  • Portal messages and online requests.
  • Faxes, scanning and records requests.
  • Referrals in and out.
  • Interruptions: questions from colleagues and providers.
  • Other, with a note.

Phone work deserves extra detail because it is often the largest block. When MGMA asked practice leaders which phone tasks take staff the most time, eligibility and prior authorization came first and scheduling second, well ahead of intake and prescription refills[4]. Split those tasks out in your codes so you can see them. MGMA also notes that the phone often remains the real front door for a large share of patients, despite portals and automated reminders[5], so do not assume digital channels have reduced phone volume without checking your own reports.

Run a one-week time study

  1. Pick a normal week

    Avoid holiday weeks, the first week of January and any week with an unusual provider schedule. Note anything unusual that happens during the study.

  2. Pull volumes from your systems

    Phone reports for inbound and outbound calls by hour, scheduling logs for appointments made and changed, check-in counts, the portal inbox and the fax log.

  3. Time a sample of each task

    For each task code, time at least 20 instances across different staff and times of day, from start to finish, including after-call work. Use a simple stopwatch and a log sheet.

  4. Log interruptions

    Ask each person to tally interruptions per hour on their log sheet. Interruptions are real work and often explain why tasks take longer than they should.

  5. Calculate average minutes per task

    Use the median rather than the mean if a few very long tasks distort the average, and note the range.

  6. Multiply and add up

    Volume multiplied by minutes per task, summed across all tasks and converted to hours, gives the workload for the week and by hour of day.

Example time log sheet entries (fictional)
TimeTask codeChannelMinutesInterruptionsNotes
8:02Inbound call: schedulingPhone40New patient, two insurances
8:07Check-inWindow31Card rescanned
8:11Inbound call: billingPhone60Transferred to billing
8:18Portal messagePortal20Refill request routed to nurse

Do not forget the portal

Portal messages are the workload most likely to be missing from older staffing models. In an MGMA poll, 70% of medical groups reported an increase in patient portal message volume in 2024, 29% said it was about the same and only 1% reported a decrease[1]. Many of those messages are scheduling, forms and billing questions that the front desk triages.

Change in patient portal message volume reported by medical groups, 2024MGMA Stat poll, January 28, 2025, 223 responses
Change in patient portal message volume reported by medical groups, 2024Stacked bar chart. Increased: 70%; About the same: 29%; Decreased: 1%.Increased: 70% (70%)About the same: 29% (29%)Decreased: 1% (1%)Change in patient portal message volume reported by medical groups, 2024Stacked bar chart. Increased: 70%; About the same: 29%; Decreased: 1%.Increased: 70% (70%)About the same: 29% (29%)Decreased: 1% (1%)
  • Increased 70%
  • About the same 29%
  • Decreased 1%

Source: Medical Group Management Association (MGMA), 2024[1]

Show the data
ItemValue
Increased70%
About the same29%
Decreased1%

Count portal messages handled by the front desk separately from those routed to clinical staff, and time a sample of each type. A two-minute routing task and a twelve-minute scheduling exchange with three replies are not the same workload.

Turn minutes into staffing hours

Raw task time is not the same as the hours you need to staff. People need breaks, there are gaps between arrivals, and some time goes to training, huddles and handoffs. Add an allowance for this; many managers start with a quarter to a third on top of measured task time and adjust after comparing with reality. Then compare the result with your staffed hours, hour by hour as well as for the whole week.

Example (fictional): a week's study at a four-provider practice measures 152 hours of front desk task time. Adding a 25% allowance gives 190 hours of needed staffing. The desk currently staffs five people at 36 hours each, or 180 hours. The overall gap is 10 hours a week, but the hour-by-hour view shows the real problem: from 8 to 10 a.m. the workload needs four people and only three are scheduled, while from 2 to 4 p.m. three people share work that needs two. Shifting one person's start time and adding a part-time morning phone shift closes most of the gap without a full-time hire.

Decide: hire, shift or remove

  • Hire when the workload exceeds staffed hours across most of the day after shifting and removing what you can, and when the work requires front desk skills.
  • Shift when the work belongs elsewhere: insurance follow-up to billing, clinical portal messages to nurses, supply orders to a clinical lead.
  • Remove when the task adds little value, such as duplicate data entry or printing forms that patients already completed online.
  • Automate when the task is high-volume and rule-based, such as appointment reminders, eligibility checks or answering routine questions about hours and directions.
  • Reschedule staff when the gap is concentrated in certain hours rather than across the day.

Most assessments end with a combination. That is the point: hiring alone often leaves the same bottlenecks in place with one more person working around them.

Pitfalls to avoid

  • Measuring the fastest staff member only. Time several people so the average reflects the team.
  • Running the study during a quiet week, or telling staff it is to find out who is slow. Explain that it is about the workload, not individuals.
  • Leaving out interruptions and after-call work. They are often a large share of the day.
  • Ignoring seasonality. If your practice has a heavy flu season or a back-to-school rush, repeat a short study in that period or adjust the figures.
  • Treating the result as permanent. Repeat the assessment each year or when something major changes, such as a new provider or a new phone system.

Using the results

Present the result on one page: total measured hours, allowance, needed hours, staffed hours and the hour-by-hour chart of need against cover. List the changes you recommend, their cost and when you will re-measure. Share the findings with the front desk team too; they did the logging and will want to know what changed because of it. If the answer is a hire, the study also tells you what the new role should do and which hours it should cover. If it is a temporary gap, see temp agencies and coping with a staffing shortage. If the analysis shows routine overtime, check your pay practices against overtime and wage-hour rules, and make sure any new schedule rules are reflected in the employee handbook.

Frequently asked questions

How do you measure front desk workload?

Pull task volumes from your phone, scheduling, portal and fax systems for a normal week, time a sample of each task, multiply volume by average minutes and convert to hours, then compare with the hours you staff, hour by hour.

How long should a front desk time study run?

One normal week is usually enough for a first assessment. Repeat a shorter study in seasonal peaks or after major changes.

How much allowance should I add for breaks and interruptions?

Many managers start with a quarter to a third on top of measured task time, then adjust by comparing the model with how the desk actually performs.

What if the study shows we do not need to hire?

Often the answer is to reschedule start times, move work to the right team, remove low-value tasks or automate routine ones. Re-measure after the changes.

References

  1. Medical Group Management Association (MGMA) (2024). Ensuring accurate coding and billing for patient portal messages as e-visits (opens in a new tab) โ†‘

  2. U.S. Bureau of Labor Statistics (2025). OEWS series OEUN000000062110043417101: Receptionists and information clerks in offices of physicians, employment (opens in a new tab) โ†‘

  3. U.S. Bureau of Labor Statistics (2025). OEWS series OEUN000000062110043601301: Medical secretaries and administrative assistants in offices of physicians, employment (opens in a new tab) โ†‘

  4. Medical Group Management Association (MGMA) (2026). Phones are still a bottleneck costing medical practices time they can't afford (opens in a new tab) โ†‘

  5. Medical Group Management Association (MGMA) (2026). Phones are still a bottleneck costing medical practices time they can't afford (opens in a new tab) โ†‘

Book a demo

See Ava handle your calls.

Book a short demo. Weโ€™ll walk through your calls and workflow, and agree what Ava should take care of.

Book a demo