Key takeaways
- Check once at booking and again two to three business days before the visit; procedures and authorizations need the first check much earlier.
- Re-check whenever the visit crosses a month end, the plan year changes, or the patient reports a new job, address or plan.
- Medicaid coverage changes often, so verify before every Medicaid visit, not just at registration.
- When the check shows no coverage and the patient will self-pay, the good faith estimate clock is already running.
The short answer
Run two checks for most visits. The first happens at booking, or within one business day of it, so problems surface while there is still time to fix them. The second runs two to three business days before the visit, close enough to catch a plan that ended and early enough to call the patient. Anything still unresolved is flagged for check-in.
Visits that need an authorization, a referral or a cost estimate need the first check much earlier, because the payer's clock, not yours, sets the pace.
Checking much earlier than that adds little. A check two months before a routine visit tells you the plan was active then, which is no guide to the visit date. Checking only on the day is the opposite problem: you learn about a lapsed plan or a missing referral when the patient is already at the window and the slot cannot be refilled. The two-check pattern gives you an early warning and a fresh answer.
Timing by visit type
| Visit type | First check | Second check | Why |
|---|---|---|---|
| Routine follow-up, known payer | At booking | 2 business days before | Catches ended plans and month-end changes |
| New patient | At booking, before confirming | 2 to 3 business days before | Network status and product need confirming once |
| Specialist visit needing referral | At booking | 5 business days before | Leaves time to request the referral |
| Procedure or imaging needing authorization | As soon as ordered | When the approval arrives, then 2 days before | Authorization reviews can take days |
| Therapy series | Before the first visit | Monthly, and at each new authorization period | Visit limits and approvals run out |
| Same-day or next-day visit | At booking | At check-in | No time for a second scheduled check |
| Medicaid patient | At booking | Before every visit | Eligibility and plan assignment can change month to month |
These are starting points. Adjust them using your own denial data: if most eligibility denials come from visits checked only at booking, move the second check closer to the visit.
For authorizations, build the payer's decision time into the first check. Since January 1, 2026, Medicare Advantage plans, Medicaid and CHIP programs and plans on the federal Marketplace must decide expedited prior authorization requests within 72 hours and standard requests within seven calendar days[1]. Other commercial plans set their own timelines, so a procedure booked a week out may already be too close.
Events that call for a re-check
- The visit falls in a different month from the last check, because plans often end on the last day of a month.
- The visit falls in a new plan year, when deductibles and out-of-pocket amounts reset.
- The patient mentions a new job, job loss, marriage, divorce, a move to another state or turning 65.
- A scheduled check returns a reject, a carve-out message or a missing benefit line.
- The visit type changes, for example a follow-up becomes a procedure.
- A claim for an earlier visit denied for eligibility or coordination of benefits.
Ask one question at every reminder call or text: "Has anything changed with your insurance since your last visit?" A yes triggers a new check that day.
Scripts for the change question and the re-check call
Reminder call or text: "Your appointment is on Thursday at 10. Has anything changed with your insurance, such as a new card or a new job? If so, reply YES or call us so we can check it before you come in."
Second check found a problem: "We checked your insurance for Thursday and the plan we have on file shows as ended. Do you have a new card? If you can send a photo of both sides through the portal today, we will check it again tomorrow morning and call you only if there is still a problem."
New plan year: "Plans often change in January, so we are checking everyone's insurance again. Please bring your current card, even if you think nothing has changed."
Give a time for the next step in every script. "We will check again tomorrow morning" sets an expectation and stops the patient calling back to ask.
Calendar dates that change coverage
Two enrollment windows reshape your schedule each winter. Medicare open enrollment runs October 15 to December 7, when beneficiaries can join, drop or switch Medicare Advantage and drug plans for coverage starting January 1[2]. Marketplace open enrollment runs November 1 to January 15, and people who enroll by December 15 are covered from January 1[3].
Plan years also reset cost sharing. Most workers with single employer coverage, 88%, have a general annual deductible[4]. A patient who owed only a copay in December may owe the full contracted rate in January, so the January re-check is about cost as much as coverage.
- December: ask every patient booked for January whether their plan is changing, and capture new card details early.
- First two weeks of January: re-verify every appointment, including established patients.
- February: re-check anyone whose January check showed a pending or new Marketplace plan.
Why Medicaid needs a check before every visit
Medicaid coverage can end for reasons that have nothing to do with the patient's health or income on the day of the visit. During the post-pandemic unwinding, at least 25,198,000 enrollees were disenrolled, and 69% of them lost coverage for procedural reasons, such as missed paperwork[5].
- Procedural reasons 69%
- All other reasons 31%
Source: KFF, 2024[5]
Show the data
| Item | Value |
|---|---|
| Procedural reasons | 69% |
| All other reasons | 31% |
Procedural losses can happen at any renewal, and many people re-enroll later. Check the state system before each visit, confirm the managed care plan assignment, and if coverage has lapsed, tell the patient before the visit so they can contact their Medicaid office.
Self-pay patients and the estimate clock
Early checks also protect your compliance. If a check shows no coverage and the patient chooses to pay themselves, the No Surprises Act rules on good faith estimates apply. For a service scheduled at least 3 business days ahead, the estimate is due within 1 business day of scheduling; for one scheduled at least 10 business days ahead, within 3 business days[6].
That means a check delayed until two days before the visit can leave you out of time for the estimate. Verify at booking so self-pay status is known while the deadline can still be met.
Worked Example: a verification calendar
Example: A fictional pediatric practice books a Medicaid patient on Monday for a well visit the following Thursday, ten days out. The scheduler runs the first check during the call and confirms the managed care plan. A second check runs automatically the Tuesday before the visit, and the check-in team runs a third on the morning of the visit because the practice's rule says every Medicaid visit is checked that day.
Example: The Tuesday check shows coverage ending at the end of the previous month. The coordinator calls the parent the same afternoon, explains that the renewal appears not to have been processed, and gives the state Medicaid phone number. The parent completes the renewal, and the morning check on Thursday shows coverage restored.
When the second check fails
Sort by visit date
Work the failed checks for the soonest visits first, since they have the least time to fix.
Fix data problems yourself
Rejections for member ID, name or date of birth are usually fixed from the card image without calling anyone.
Contact the patient the same day
For ended coverage or a new plan, call or message the patient with what you found and what you need.
Decide by the day before
If coverage is still not confirmed the day before, offer the patient a choice: keep the visit as self-pay with an estimate, or move it until coverage is sorted.
Flag for check-in
Anything unresolved goes on the check-in list with a note on what to ask for at the window.
Build the timing into your system
Tag visit types
Give each appointment type a verification rule: when the first check runs and when the second is due.
Schedule batch checks
Run an evening batch for visits two business days out, and a second batch for any visit in a new month or plan year.
Create a due list
Show staff a daily list of visits whose second check is due or failed, sorted by visit date.
Add the change question
Put the insurance change question into every reminder script and text, and route yes answers to the due list.
Review monthly
Compare eligibility denials against when each visit was last checked, and tighten the rule where denials cluster.
For the checking steps, see how to verify patient insurance. For Medicaid specifics, see Medicaid eligibility verification.
Frequently asked questions
Is verifying insurance on the day of the visit enough?
For same-day visits it is the only option, but for planned visits it is too late to fix problems. A day-of check leaves no time to get a referral, a new card or an estimate.
How often should we verify a patient in a therapy series?
Before the first visit, at least monthly after that, and whenever a new authorization period starts. Visit limits and approvals run out mid-series more often than coverage ends.
Do we need to re-check established patients in January?
Yes. Plans change at open enrollment and deductibles reset with the plan year, so re-verify every appointment in the first weeks of January.
What if a patient's coverage ends between booking and the visit?
Call the patient as soon as the check shows it, explain what you found, and offer options: a new card, a self-pay estimate, or rescheduling once coverage is restored.
References
Centers for Medicare & Medicaid Services (CMS) (2024). CMS Interoperability and Prior Authorization Final Rule (CMS-0057-F) fact sheet (opens in a new tab) โ
Medicare.gov (Centers for Medicare & Medicaid Services) (current). Joining a plan (opens in a new tab) โ
HealthCare.gov (Centers for Medicare & Medicaid Services) (2026). Dates and deadlines for 2027 health insurance (opens in a new tab) โ
KFF (2026). 2026 Employer Health Benefits Survey (opens in a new tab) โ
KFF (2024). Medicaid Enrollment and Unwinding Tracker (opens in a new tab) โ
Legal Information Institute, Cornell Law School (current). 45 CFR ยง 149.610 - Requirements for provision of good faith estimates of expected charges for uninsured (or self-pay) individuals (opens in a new tab) โ