Key takeaways
- Use the Medicare Beneficiary Identifier from the patient's Medicare card; if the patient cannot find it, the MAC portal look-up tool can usually return it.
- Check through a HETS-connected tool or your MAC portal, and read entitlement dates, Part B deductible, other insurance and any Medicare Advantage enrollment.
- If the response shows a Medicare Advantage plan, stop and verify with that plan: it, not traditional Medicare, is billed.
- Re-check every Medicare patient in January, because plan choices made in the fall take effect then.
Why Medicare checks need their own routine
Medicare covered 20.1% of the US population in 2025[1], and for many primary care and specialty practices the share of visits is far higher. A Medicare check answers different questions from a commercial one: is the patient entitled to Part B, is the deductible met, is another payer primary, and is the patient actually in a Medicare Advantage plan?
That last question catches many front desks out. In 2026, 55% of eligible Medicare beneficiaries, 35.2 million of 64.2 million people with Parts A and B, were enrolled in Medicare Advantage[2]. Many still carry their red, white and blue Medicare card along with the plan card.
- Medicare Advantage 55%
- Traditional Medicare 45%
Source: KFF, 2026[2]
Show the data
| Item | Value |
|---|---|
| Medicare Advantage | 55% |
| Traditional Medicare | 45% |
The steps below work for any practice that bills traditional Medicare. Plan-specific checks for Medicare Advantage follow the same logic as a commercial check, with extra attention to networks, referrals and authorizations.
Step 1: get the right identifier
Traditional Medicare checks use the Medicare Beneficiary Identifier (MBI), printed on the patient's Medicare card. It is not the Social Security number, and older numbers based on it no longer work for checks or claims.
- Ask for the Medicare card and any other plan card the patient carries, including Medicare Advantage, Medigap, employer or Medicaid cards.
- Copy the MBI exactly; letters and numbers that look alike are a common source of rejections.
- If the patient cannot find the card, use the MBI look-up tool in your MAC's provider portal, which matches on name, date of birth and Social Security number.
- Record the name exactly as Medicare holds it; a mismatch with your registration name will reject the check.
Ask the Medicare Secondary Payer questions at registration and at least yearly: is the patient or spouse still working with employer coverage, is the visit related to an accident or injury that another insurer may cover, and do they have coverage through workers' compensation, veterans benefits or black lung programs? Save the answers with the date. They decide whether Medicare is primary before you ever run the check.
Step 2: choose your route
| Route | How it works | When to use it |
|---|---|---|
| Practice system or clearinghouse connected to HETS | Sends a real-time 270 to CMS and shows the 271 | Default for most practices; fastest for daily volume |
| MAC provider portal | Log in to your Medicare Administrative Contractor's portal and search the beneficiary | When the system response is unclear, or to use the MBI look-up tool |
| MAC interactive voice response line | Phone menu that reads back eligibility | Back-up when portal or system access is down |
| Medicare Advantage plan portal | The plan's own website | Whenever the Medicare response shows plan enrollment |
CMS's HIPAA Eligibility Transaction System takes real-time 270 requests and returns 271 responses. It does not accept batch transactions, and CMS says it is typically available 24 hours a day, 7 days a week[3]. Vendors that offer "batch" Medicare checks are sending your list one patient at a time behind the scenes.
Set up MAC portal access before you need it. Each MAC has its own registration process, usually with an approver at the practice who grants access to other staff. Name that approver, keep the list of users current, and make sure at least two people can log in so the portal is still usable during holidays and sick days.
Step 3: read the response
Work through these items in order and note each one in the verification record.
- Part A and Part B entitlement dates: an office visit needs active Part B on the date of service.
- Medicare Advantage enrollment: a plan name and dates mean the plan is billed, not traditional Medicare.
- Medicare Secondary Payer information: an employer plan or other coverage listed as primary must be billed first.
- Part B deductible remaining: drives what the patient owes for the first visits of the year.
- Preventive service dates: some responses show when a patient is next eligible for services with frequency limits, such as the annual wellness visit.
- Hospice or home health periods: these can change who is billed for related services.
- Qualified Medicare Beneficiary status, where shown: patients in this program may not be billed Medicare cost sharing.
If the response shows other primary insurance that the patient says ended, do not just bill Medicare. Ask the patient to update their information with Medicare's coordination of benefits contractor, and note the date they were told.
Common Medicare rejections and fixes
- Beneficiary not found: usually a mistyped MBI or a name that does not match Medicare's records. Re-key from the card, check hyphenated and compound surnames, and confirm the date of birth.
- Old identifier used: a number based on the Social Security number was entered from an old record. Replace it with the MBI and update the registration.
- Part B not active on the date of service: the patient may have Part A only, may have dropped Part B, or may be new to Medicare. Ask the patient and explain that the visit may not be covered without Part B.
- Plan enrollment shown: the patient is in Medicare Advantage. Switch to the plan's verification route.
- Other primary payer shown: confirm with the patient whether that coverage is still active before billing anyone.
Most of these are fixed at the desk in minutes. Track them by type for a month; if one keeps repeating, fix the registration step that causes it.
Cost sharing to explain
For 2026, the Part B deductible is $283 a year, and after it is met the patient usually pays 20% of the Medicare-approved amount for covered services when the provider accepts assignment. The standard Part B premium is $202.90 a month[4]. Patients with Medigap or Medicaid may have some or all of that cost sharing covered by the other plan.
Example: A fictional patient, Mrs. Chen, books her first specialist visit of the year in February. The response shows Part B active and the full deductible remaining. The Medicare-approved amount for the visit in this Example is $190, so the coordinator tells her she may owe the full $190 toward the deductible, less anything her supplement plan covers, and checks the supplement card before the visit.
When the response shows a Medicare Advantage plan
Stop the traditional Medicare workflow
Do not bill Medicare. Update the patient's primary payer to the plan shown in the response.
Get the plan card
Ask the patient for the plan card, or call them before the visit if they did not bring it.
Verify with the plan
Check network status, referral rules and authorization requirements through the plan's portal or provider line.
Tell the patient
Explain that the plan, not Original Medicare, will process the visit, and give the plan's copay if known.
Enrollment changes cluster around January. Medicare open enrollment runs October 15 to December 7, and plan changes made then take effect January 1[5]. Re-check every Medicare patient in the first weeks of January. Plan-specific checks are covered in Medicare Advantage verification tips.
Scripts for Medicare conversations
Plan enrollment found: "Medicare's records show you are in a Medicare Advantage plan, so that plan will handle your visit rather than Original Medicare. Could you send us a photo of that plan's card, or read me the member ID?"
Other insurance on file: "Medicare shows another insurance as primary for you. Are you or your spouse still working with that coverage? If it has ended, you will need to tell Medicare's coordination of benefits office, and we can give you the number."
Deductible not met: "Your Part B deductible starts again each January, and it has not been met yet this year. That means you may owe the Medicare-approved amount for this visit up to the deductible. If you have a supplement plan, bring that card and we will bill it too."
A Medicare check in five minutes
- MBI and name match the Medicare card.
- Part B active on the date of service.
- No Medicare Advantage enrollment, or the plan has been verified separately.
- No other primary payer, or the order of benefits is confirmed.
- Part B deductible remaining noted for the estimate.
- Preventive visit timing checked when booking a wellness visit.
- Supplement or Medicaid coverage noted as secondary.
For timing rules across all payers, see how far ahead to verify insurance. For patients who also have Medicaid, see Medicaid eligibility verification.
Save the response with the date, and add a note when anything was confirmed by phone or portal rather than the electronic check.
Frequently asked questions
Can we check Medicare eligibility with the patient's Social Security number?
Not for the check itself; Medicare eligibility checks and claims use the Medicare Beneficiary Identifier. The MAC portal's MBI look-up tool can use the Social Security number to find the MBI when the patient does not have the card.
Why does the Medicare response show a different payer?
The patient may be in a Medicare Advantage plan, or Medicare may have another payer on file as primary, such as an employer plan. Verify with the plan shown and confirm the order of benefits with the patient.
Does Medicare eligibility show whether the patient is due for an annual wellness visit?
Responses can include dates for services with frequency limits, including some preventive services. Check that field when booking a wellness visit to avoid a denial for timing.
Should we re-check Medicare patients every visit?
Before every visit is safest, and always in January and after the patient mentions any change, such as a new plan, a move or retiring from an employer plan.
References
U.S. Census Bureau (2026). Health Insurance Coverage in the United States: 2025 (Current Population Reports P60-291) (opens in a new tab) โ
KFF (2026). Medicare Advantage in 2026: Enrollment Update and Key Trends (opens in a new tab) โ
Centers for Medicare & Medicaid Services (CMS) (current). HIPAA Eligibility Transaction System (HETS) (opens in a new tab) โ
Medicare.gov (Centers for Medicare & Medicaid Services) (2026). Medicare costs (opens in a new tab) โ
Medicare.gov (Centers for Medicare & Medicaid Services) (current). Joining a plan (opens in a new tab) โ